Double Glazing Seal Repairs
If double glazing window seals are broken this can lead to damp and mould. This can cause damage to the frame and walls surrounding it, as well as affecting your health.
Resealing is a more cost-effective way to repair most uPVC window frames rather than replacing them. A glazier will clean the frame and the glass of the window, apply a new bead, and smooth it.
Water Leaks
Window seals are designed for moisture to be kept out of your home. However, when they begin to break down, it can result in water leaks around your windows. Not only is a leaking window unpleasant however, it could also cause costly damage to your home's structure. It is crucial to spot an issue early and have it repaired by an expert before it gets worse.
Often, the source of your windows that leak is not in the glass itself, but on the frame and sill. This is the most frequent sign of a leaky seal. It could be due to damage to the window seal as a result of weather conditions or aging, worn-out caulking, or even a blocked drainage section resulting in the accumulation of ice or water.
Water that is visible between the double-glazed panes can be a indication that your window seal is failing. It's not as risky as a leak from water, as the water does not travel far enough to reach into your home. However, it does mean that the inert gases that are encased between your windows have escaped out. This will reduce the insulation value of your window.
Condensation between the panes is another sign of a leaky seal. This could be caused by the seal being damaged or a damp atmosphere in your home. It could also be a problem with the glass. The condensation may not only be irritating but it can also cause the development of mildew and mould in your home that can be very difficult and expensive to eliminate.
It's time to inspect your double-glazed windows when you observe these indications. Replacing or repairing windows will safeguard your home from water leaks, lower the cost of energy and reduce draughts. It's a small cost to pay to ensure the safety and comfort of your family. Contact Thompson Creek Window to discuss your options regarding window seal repair or replacement. Our experienced professionals are happy to assist you! We serve homeowners throughout the Mid-Atlantic region.
Condensation
A broken seal for double glazing can allow water to get into the insulating gap. This can lead to condensation within the window panes and may cause misting or fogging.
When you notice condensation forming in your home, it's time to contact a professional double glazing repair service. Condensation is a sign that the vacuum seal fabricated at the factory has been damaged and moisture is getting into the insulated gap.
Condensation can be caused by variety of factors however, the most common cause is gaskets, sealants or insulation in the uPVC frames of the windows. In the end, there are a few different double glazing repair options, however it is vital that the new seal is correctly designed to ensure a perfect fit and a water-tight seal.
Gaskets are generally composed of polyurethane, which is a material that can be used to fill in gaps between double-glazed units. These are designed to be long-lasting but they can perish as time passes because of wear and tear as well as exposure to various temperatures and weather conditions throughout the year.
As time passes the foam may shrink or crack, which creates a gap in the seal, which allows moisture to get into the double-glazed windows. This can cause condensation, but it could also result in a loss of energy efficiency, meaning that you're losing heat from your home to the outside air.
Re-sealing the windows is one way to fix this problem. This isn't a 100% solution as it will eliminate the condensation that is already present and not address the underlying problems that are causing the double-glazed windows to leak or develop condensate.
A professional who is able to provide an insurance-backed guarantee must replace your windows completely. If the company fails, you are still protected by insurance. It is important to note that the warranty on your replacement windows must be at least 10 years.
Misting
As the fall months get closer, it's a good idea ensure that your double-glazing seals are in good shape. Window seals that are damaged or worn out do don't just affect the insulation properties of your windows, but could also cause condensation, mold and damp. To prevent further damage to your double-glazed windows and save money on energy bills it is essential to fix any issues as soon as you can.
A standard double glazed window is made from two panes of glass held together by an internal space filled with gas. The outer sealant layer fills in the gap between the uPVC frames and the glass. This is crucial to maintaining the airtight seal that keeps warm and cold air separate in your home, saving you money on your heating bill. Unfortunately, over double glazing window repairs will fail due to age, weather conditions or even poor installation. The magic insulation formula which makes double-glazed windows so efficient can start to lose its effectiveness when this occurs.
If not checked or unchecked, damaged or defective seals could lead to condensation and damp that will not only ruin the appearance of your windows, but can also affect your health. The dampness and moisture can cause damage to walls, ceilings floors, and other surfaces within your home. They also create allergens and irritants that can be harmful to your health as well as the health of your family.
One of the most common problems that can arise with your double glazing is the possibility of misting between the panes. This happens when moisture gets into the insulated area of your window and can be very difficult to fix without professional help for repair of the seal on your double glazing.
There are DIY methods of tackling this issue, but we'd advise against it because it's not only dangerous but can be extremely dirty and damaging to your windows. These methods involve drilling holes into the glass units and applying chemicals to eliminate the condensation and fog. This could cause a number of issues, including the possibility of exposing your windows and units to water damage.
Professional glaziers have the skills, tools and experience needed to effectively reseal your uPVC frames and provide you with long-lasting results. They can also offer advice on how to maintain your uPVC window to avoid any future issues.
Draughts
A window that is draughty is an indication that the sealant has probably been damaged and must be repaired or replaced. This will stop cold air from entering your home. It will also improve the efficiency of your energy, reduce heating bills, and increase comfort.
It is important to know that some draughts aren't caused by the window seals but rather the gap between the bricks' frames. In some instances it may be possible to fix this by simply filling the gap with silicone caulking. If this is not working, it will require resealing professionally.
If the sealant around windows with double glazing begins to degrade, it allows for water infiltration and can lead to damp or even mold in a few instances. This could have a negative impact on health and can be very detrimental to the property. If you observe any issues with water intrusion, you should deal with them as soon as you can. If your windows are still covered by a guarantee, it's worth checking to find out if the company that sold them will pay for the cost.
The windows themselves are typically covered by a guarantee that could last for at least 10 years However, some companies offer lifetime warranties, therefore it is worthwhile looking into this information. If your double glazing falls under warranty, it is recommended to contact the company that sold them as fast as you can and inform them about any problems you are experiencing. It is best to reach the company in person, or by email and letter. This will ensure that everything is documented and clear.
It is also worth noting that draughts may be caused by defective hinges, rather than the absence of seals that are effective. The hinges are located close to the window sash, which is the section you open. If they're not regularly oiling them and become stiff, they may develop. This could leave an opening between the sash and the frame which could allow cold air in. This issue can be fixed by replacing these hinges without impacting window seals.